John Guest Female Adapter - 1/2" Female BSP x 1/4" Push Fit
MPN:
The John Guest 1/2" Female BSP x 1/4 Push Fit Adapter is suitable for potable domestic an...
MPN:
The John Guest 1/2" Female BSP x 1/4 Push Fit Adapter is suitable for potable domestic an...
MPN:
The John Guest Female Adapter to connect onto 3/8" threaded taps, appliances and fittings...
MPN:
The John Guest 3/4" Female BSP x 3/8" Push Fit Tap Adapter is suitable for potable domest...
MPN:
The John Guest 3/8" Female BSP x 3/8" Push Fit Tap Adapter is suitable for potable domest...
MPN:
The John Guest 3/8" Push Fit x 1/2" BSP Female Adapter is suitable for potable domestic a...
MPN:
The John Guest 3/4" Female BSP x 1/4" Push Fit Female Adapter is suitable for potable dom...
MPN:
DMfit 3/8" Female x 1/4" Push Fit Adapter is suitable for potable domestic and commercia...
MPN:
The John Guest 15mm Push Fit x 3/8" Push Fit Reducer is suitable for connecting to mains ...
MPN:
John Guest Equal Elbow with 3/8" push-fit connections. Suitable for potable domestic and ...
MPN:
The John Guest Male Adapter with 3/8" BSPT x 3/8" Push Fit connections is suitable for po...
MPN:
John Guest 3/8" Push Fit x 1/4" Push Fit Reducing Straight Connector is suitable for pota...
MPN:
The DM Fit Reducing Straight Connector is manufactured from a black acetal copolymer, wh...
MPN:
The John Guest Stem Elbow with 3/8" push-fit x 3/8" Stem connections is suitable for pota...
MPN:
John Guest 15mm Push Fit x 3/4" BSP Male Straight Adapter is suitable for connecting to m...
MPN:
John Guest 3/8" Push Fit Equal Tee Fitting is suitable for potable domestic and commerci...
MPN:
John Guest Equal Straight Connector with 1/4" x 1/4" push-fit connections. Suitable for p...
MPN:
The DMfit 1/2" Female x 8mm Push Fit Adapter is suitable for potable domestic and commer...
MPN:
John Guest Equal Straight Connector with 3/8" x 3/8" push-fit connections. Suitable for p...
MPN:
The John Guest Male Adapter - 1/2" Male NPTF x 3/8" Push Fit is suitable for potable dome...
MPN:
The John Guest Stem Elbow with 1/4" push-fit x 1/4" Stem connections is suitable for pota...
MPN:
John Guest Equal Straight Connector with 8mm x 8mm push-fit connections. Suitable for pot...
MPN:
This John Guest 15mm Push Fit to 1/4" Push Fit Adapter is the ideal solution for installi...
MPN:
The DM Fit Reducing Straight Connector is manufactured from a black acetal copolymer, wh...
MPN:
John Guest Adapter to connect onto 3/4" threaded taps, appliances and fittings. This will...
Our UK-based team can help match your appliance, system or application to the correct replacement or filtration setup.
BSP thread sizes are names, not measurements. The name comes from the bore of the pipe the thread was originally made for, so the thread itself is larger. Measure across the outside of the male thread to find its size: about 9.7mm is a 1/8 inch thread, 13.2mm is 1/4 inch, 16.7mm is 3/8 inch, 21mm is 1/2 inch and 26.4mm is 3/4 inch.
Measure across the outside of the tube. Push fit fittings are sized by the outside of the tube they take, so a 1/4 inch fitting takes tube that measures 6.35mm across and a 3/8 inch fitting takes tube that measures 9.5mm.
No. Inch and metric tube are close in size but not the same, and the wrong one will not seal properly. 1/4 inch tube measures 6.35mm across and will not seal in a 6mm fitting.
They are different thread standards and are not interchangeable. BSP (parallel) and BSPT (tapered) are the British standards used on most UK taps, valves and appliances. NPTF is an American tapered thread found on some imported equipment. If you are not sure which you have, send us a photo and we will check.
Push the tube squarely into the fitting until it stops. A collet grips the tube and an O-ring seals around it. To release it, push the collet in towards the fitting and pull the tube out. Cut the tube square and clean before fitting.